Best current price£17.70from eBay
Shopping.co.uk recommended and popular offers
eBay£17.70Visit shop Farecla G-Mop AGM-CF Advanced Cutting Compounding Foam 6"" 150mm Hook & Loop
Visit shop6 offers from £17.70 - £19.85
View price history by clicking the chart icon.
The Farecla G-Mop Cutting Compounding Foam is designed for professional detailers and automotive enthusiasts who require a high-performance solution for surface restoration and paint correction. Its primary benefit is a rapid cutting action that effectively removes defects while remaining durable enough for repeated use on various painted surfaces; however, users should note that as an aggressive cutting pad, it requires a finishing polish step afterward to achieve a perfect, hologram-free shine.
| Model Part Number | AGM-CF |
|---|---|
| Brand | Farecla |
While it is optimized for Farecla G3 compounds, it is compatible with most standard automotive cutting compounds.
Hand washing with warm water and a mild detergent is recommended to preserve the foam structure.
No, this is an aggressive cutting pad. You should switch to a softer finishing pad for final polishing steps.
It is best used within the standard 1200-2000 RPM range on a rotary polisher, or moderate speeds on a dual-action machine.
Replace the pad if the foam becomes brittle, torn, or if it no longer maintains its shape after cleaning.
Ensure the hook and loop surfaces are clean and free of debris, then re-center the pad firmly onto the plate.
Reduce machine speed and apply lighter pressure; ensure you are not working an area that is too dry by adding a small amount of compound.
Use a spur or pad cleaning brush periodically during the process to keep the foam pores open and the cutting action consistent.
To begin, center the 150mm pad onto the hook and loop backing plate of your machine polisher to prevent vibration. This pad is fully compatible with most standard rotary and dual-action backing plates of the same diameter. After use, clean the foam immediately using a pad cleaning brush or warm water with a mild degreaser to remove residual compound. Air dry the pad completely in a clean area before storing it; never use a machine dryer as this can damage the foam cell structure.
