Rustins Quick Drying Advanced Wood Preserver Protector - Clear 1 Litre

Coverage is approximately 3 – 4m² per litre per coat, depending on the absorbency of the wood.

No, you must remove all existing paint or varnish before applying the wood preserver.

Apply at least one coat. For optimal protection, apply multiple coats, allowing each coat to dry completely before the next.

Yes, this product is suitable for both interior and exterior use. It's designed to protect wood against wood-rotting fungi.

Always wear appropriate safety equipment, such as gloves and eye protection. Work in a well-ventilated area.

Clean brushes and sprayers with a suitable solvent, following the manufacturer's instructions.

Refer to the product label for specific shelf life information.

Ensure even distribution with brush strokes. Apply thin, even coats, and avoid excessive buildup.

Ensure proper ventilation and that the application temperature is within the recommended range. Check that the wood is not excessively wet before application.

Ensure the wood is absorbent. Apply multiple coats, allowing each coat to dry before applying the next.