Sandtex Ultra Smooth Masonry Paint - White

The approximate coverage is 12-16m² per litre, depending on the surface texture and porosity.

The paint is rainproof in approximately 1 hour after application.

This paint is specifically designed for exterior masonry surfaces and is not recommended for interior use.

Walls must be clean, dry, and free from loose paint, dirt, and mould. Repair any cracks and prime bare or powdery surfaces.

Apply in dry conditions when the air and surface temperature is between 10°C and 30°C.

Clean application tools immediately after use with water.

Yes, the Microseal technology makes the coating dirt and mould resistant, helping to maintain the appearance of your walls.

Ensure the surface was properly cleaned, dry, and free from contaminants. Check if a suitable primer was used on bare or powdery surfaces. The surface temperature may have been too low during application.

Ensure the paint was thoroughly stirred before and during application. Check for inconsistent application thickness. Ensure previous coats were adequately dry before applying the next.

This can indicate poor surface preparation, inadequate primer use, or application in unsuitable conditions (e.g., damp surface). Ensure all preparation steps were followed correctly.

Ensure all existing mould was removed with a fungicidal wash *before* painting. If mould reappears, treat the affected area and re-apply paint if necessary.