Schneider Electric Selector Switch - 2 Positions - Knob

This switch is rated for a maximum AC voltage of 24V.

It means that when you release the knob, it automatically springs back to its default position. It does not stay in the position you turn it to unless it's designed as a latching type (this specific model is spring return).

No, due to its low voltage rating (24V AC max), it is intended for control and signaling circuits, not for switching main power for heavy equipment.

The switch requires a standard 22mm diameter cutout in the control panel.

No, this is a non-illuminated selector switch. It does not have an internal light source.

This selector switch is part of the Schneider Electric Harmony XB4 series, known for its robustness in industrial applications.

This specific model has two positions.

Ensure the switch is properly secured in the panel cutout and the internal mechanism is not obstructed. Check if the knob is fully seated.

Verify that all screw terminals are tightened securely. Inspect wiring for any damage or loose strands.

Check for any foreign material around the switch mechanism. Ensure the panel cutout is clean and free of burrs.

The spring return mechanism might be damaged or obstructed. Contact technical support if the issue persists after inspection.