No.10 Metal Plier Stapler - B&Q

This B&Q No.10 Metal Plier Stapler is designed to use standard 24/6 and 26/6 staples.

The stapler is designed to staple up to 12 sheets of standard paper at a time.

Open the plier handles, locate the staple magazine at the base, load a strip of staples, and close the stapler. Ensure staples are aligned correctly.

It is built for durability with a metal construction and is efficient for everyday tasks and moderate document binding. For extremely high volumes or very thick documents (over 12 sheets), a larger, more powerful stapler might be more suitable.

Wipe the exterior with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the staple channel is free of paper debris.

The stapler measures approximately 11.0cm in length, 2.0cm in width, and 5.5cm in height.

This model is designed for standard stapling only and does not feature a tacking or pinning function.

Ensure you are using the correct staple size (24/6 or 26/6). Check that staples are loaded correctly and not bent. Do not exceed the 12-sheet capacity.

Check the staple strip; it might be nearly empty or the staples may be of poor quality. Ensure the stapler is fully closed on the paper stack. If stapling the maximum 12 sheets, try reducing to 10 for smoother operation.

Check for any obstructions in the stapling mechanism. Lightly lubricate the hinge point with a small amount of machine oil if necessary, wiping away any excess. Ensure the staple magazine is clean and free of debris.

This usually indicates that the staple is not properly seated in the anvil (the part that bends the staple legs). Check that the staple strip is straight and that the stapler is aligned correctly with the paper edge.