StoneCare4U Driveway Cleaner - Green

Stonecare4U Driveway Cleaner is a high-performance, alkaline-based cleaner for external natural st...

Best current price£69.95from Homebase

All Offers

3 offers from £69.95

View price history by clicking the chart icon.

HomebaseStonecare4u Essential Driveway Cleaner 5L 3 Pack
Free delivery in 1–3 days
£69.95
Visit shop
wilkoStoneCare4U - Driveway Cleaner - 5L - 3 Pack
Free delivery in 1–3 days
£69.95
Visit shop

Product Information

Full details

The StoneCare4U Driveway Cleaner is designed for homeowners with natural stone driveways looking to tackle tough outdoor grime. Its key benefit is an effective, non-etching alkaline formula that removes dirt, algae, lichen, black spots, weeds, and moss without damaging the stone. A potential caveat is that it may slightly lighten some surfaces, requiring a test patch first, and requires careful handling around vegetation and fabrics.

All features

ColourGreen
BrandStoneCare4U

Extended Product Information

FAQs

What types of stone is this cleaner suitable for?

This cleaner is designed for external natural stone driveways and other outdoor stone and masonry surfaces.

Can I use this cleaner on painted surfaces?

The product information does not specify suitability for painted surfaces. It is recommended for natural stone and masonry. Always test in an inconspicuous area first.

How long should I leave the cleaner on the driveway?

You should keep the surface wet with the cleaner for at least one hour. For lighter soiling, two hours of dwell time is recommended. For extreme soiling, extend the dwell time to four hours or even overnight.

Is this product safe to use near plants?

No, you must avoid contact with vegetation. If contact occurs, rinse the vegetation immediately and thoroughly with water.

What is the coverage rate?

With a 1:1 dilution, the coverage is up to 50m² per 5L. Coverage will vary depending on the level of soiling and the dilution used.

Can I use this on my patio?

Yes, it is suitable for all outdoor stone and masonry surfaces, including patios.

What safety precautions should I take?

Wear appropriate safety gear, including gloves and eye protection. Avoid contact with fabrics and tarmac. Ensure good ventilation during use.

Troubleshooting

Cleaner not removing stains effectively

Ensure the surface remained wet for the full recommended dwell time. For stubborn stains, try applying the cleaner neat or extending the dwell time further (up to overnight). Agitate stubborn spots with a stiff brush.

Stone appears lighter after cleaning

This can happen as the cleaner lifts ingrained dirt. Perform a smaller test patch first in the future to assess color change. For severe lightening, consider a stone-rejuvenating product suitable for your stone type.

Cleaner has contacted vegetation

Rinse the affected vegetation immediately and thoroughly with plenty of water. Monitor the plants for any signs of distress.

Product is difficult to rinse off

Ensure you are using ample amounts of water. A power washer significantly aids in thorough rinsing and removal of the cleaner residue.

Pros and Cons

Pros

  • Effectively removes a wide range of organic growth and dirt.
  • Safe for natural stone and masonry, avoids etching.
  • Can be diluted for tailored cleaning power.
  • Suitable for various outdoor stone surfaces.
  • Provides a deep clean when used as directed.

Cons

  • May slightly lighten some stone surfaces.
  • Requires significant dwell time (minimum 1 hour, up to overnight).
  • Requires thorough rinsing, preferably with a power washer.
  • Must avoid contact with vegetation, or rinse immediately.
  • Contains a chlorine-type agent, avoid contact with fabrics and tarmac.

Setup, Compatibility & Care

Setup:

  1. Preparation: Sweep away any loose debris, leaves, or dirt from the driveway.
  2. Safety Gear: Wear appropriate safety gear, including gloves and eye protection.
  3. Testing: Always test the cleaner on a small, inconspicuous area of your driveway first to determine the ideal dilution and dwell time, and to check for any adverse effects on the stone's color.
  4. Dilution (if necessary): For general cleaning, dilute the product 1:1 with water. For heavier soiling, use neat or with less dilution. Consult the test patch results.

Application:

  1. Apply: Use a sprayer or watering can to apply the cleaner evenly over the stone surface.
  2. Keep Wet: Ensure the surface remains wet with the cleaner for at least one hour. Reapply small amounts of water if it starts to dry out.
  3. Agitate: For stubborn stains, use a stiff brush to agitate the area during the dwell time.
  4. Dwell: Allow the cleaner to dwell for a minimum of two hours. For extreme soiling, extend dwell time to four hours or overnight.
  5. Rinse: Thoroughly rinse the entire surface with water. A power washer is recommended for the best finish.

Compatibility:

  • Suitable for all outdoor natural stone and masonry surfaces.
  • Caution: Avoid contact with vegetation; rinse immediately if contact occurs. Avoid contact with fabrics and tarmac as the product contains a chlorine-type agent.

Care:

  • Store the product in a cool, dry place, away from direct sunlight and incompatible materials.
  • Keep the container tightly closed when not in use.
  • Clean up spills immediately to prevent damage to surrounding surfaces or vegetation.

Price History

DatePrice
Visit shop