Tile Rite Long Leg Tile Spacer - 3mm

These 3mm tile spacers are designed for professional tilers to ensure accurate alignment and consistent spacing between floor tiles, resulting in uniform grout lines.

While primarily marketed for floor tiles, they can also be used for accurate alignment of wall tiles, especially where a precise, narrow grout line is required.

No, these are specifically 3mm spacers. For different grout line widths, you would need spacers of corresponding sizes.

The product information specifies 'BAGS', indicating they are supplied in quantity, but the exact number per bag is not detailed. They are intended for project use.

The long leg design provides greater stability and support during tile placement, helping to keep the spacers securely in position and ensuring more accurate alignment.

These are generally considered disposable items, intended to be removed after the tiles are set. While in some very clean applications they might be reused, their design and material are optimized for single-use placement.

Ensure a spacer is placed at every corner where tiles meet. Check that the spacers are fully seated against the tile edges and that the floor surface is relatively level. Remove and reapply spacers if necessary.

While designed to be removed easily, in some cases grout can harden around them. Try to gently wiggle the spacer before the grout fully sets. If hardened, carefully use a utility knife or grout rake to break the bond before pulling.

Verify that the correct number of spacers are being used consistently around each tile. Ensure the spacers themselves are not damaged or warped. Check that tiles are being laid flat and not on an angle.