Forma Composite Decking Angle Trim - 40mm x 3000mm - Spiced Oak

While it is designed for Ecoscape systems, it can be used on other composite decking as long as the color and profile dimensions are compatible with your existing setup.

All composite materials experience slight color settling in the first few weeks, but the Forma range is designed to be UV-stable and highly resistant to significant fading.

It is not recommended to paint or stain the trim, as the composite material is finished to mimic natural timber and paint may not adhere correctly.

Use a standard wood-cutting saw with a fine-toothed blade. A circular saw or a miter saw will provide the cleanest results.

Yes, the composite material is highly water-resistant and suitable for outdoor use, though it should not be permanently submerged in water.

Use color-matched composite screws fixed at regular intervals to ensure the trim stays securely fastened to the deck or cladding frame.

Ensure that you have left adequate expansion gaps and that screws were not tightened too firmly against the material.

Check that the miter cuts are accurately set to 45 degrees; use a miter box for higher precision.

Always pre-drill a pilot hole slightly smaller than the shank of your screw to relieve stress in the composite material.