Leaf Spring U Bolt / Clamp - Febi - 37712

It is standard practice to confirm the contents upon arrival, but typically, these components are sold as standalone pieces. Ensure you have matching M20 x 1.5 nuts available.

If you have experience with heavy vehicle suspension and proper lifting equipment, it is possible. However, due to safety risks involving heavy springs, professional installation is strongly recommended.

No, this is a high-quality aftermarket part manufactured by Febi that is designed to be compatible with Renault Trucks OEM 5010066498.

It is best practice to replace all U-bolts on a single axle at the same time to ensure equal tension and structural integrity across the suspension assembly.

Febi produces these using high-strength steel alloys designed to meet or exceed the durability requirements for commercial vehicle suspension applications.

Verify your axle diameter; the 92.45mm width is specific to certain models and will not fit if the leaf spring stack or axle housing exceeds this capacity.

Clean the threads on the U-bolt and the nut with a wire brush to remove any dirt or surface rust. Use a light application of anti-seize lubricant if threads are dry.

Ensure the threads are not damaged and that you are using a calibrated torque wrench. Do not use an impact wrench to achieve final torque, as this can stretch the bolt.