Lexar Professional SSD - 2 TB - M.2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Lexar Professional NM1090 2TB SSD is a high-performance storage solution designed for power users, gamers, and creative professionals who require extreme data transfer speeds and reliable capacity. Leveraging the latest PCIe 5.0 interface, it provides top-tier read and write performance for intensive workflows, though it requires a compatible motherboard and adequate clearance due to its robust active-cooling heatsink design.
All features
| Series | Professional |
|---|---|
| Model Part Number | LNM1090002T-RNANG |
| Brand | Lexar |
Extended Product Information
FAQs
Can I use this drive in a PS5?
While it is physically compatible with the M.2 slot, the PCIe 5.0 speeds exceed PS5 requirements, and the heatsink may be too tall for the PS5 expansion bay cover.
Do I need to install special drivers?
No, this drive uses the standard NVMe 2.0 protocol and will function using the default drivers provided by Windows or Linux.
What is the warranty period?
Lexar provides a standard manufacturer warranty; please consult the packaging or Lexar's website for specific regional terms based on your purchase.
Is the RGB lighting customizable?
Yes, the heatsink includes programmable RGB lighting that can typically be controlled via your motherboard's proprietary lighting software.
Does this SSD require a motherboard heatsink?
No, this model includes its own high-performance active heatsink, so you should remove any motherboard-integrated M.2 covers before installation.
Troubleshooting
Drive not detected in BIOS or Windows
Check that the drive is fully seated in the M.2 slot. Verify if your motherboard disables certain SATA ports when an M.2 drive is occupied.
Performance seems slower than advertised
Ensure the drive is installed in a PCIe 5.0 compatible slot. Older PCIe 4.0 or 3.0 slots will limit throughput to their maximum bandwidth.
Fan noise is audible
Check your motherboard's fan control software to adjust the fan curve for the M.2 header, or ensure the fan is not obstructed by cables.
Pros and Cons
Pros
- Industry-leading PCIe 5.0 transfer speeds
- Active cooling solution prevents thermal throttling
- Fully integrated heatsink with aesthetic RGB lighting
- High-endurance SLC NAND ideal for demanding workloads
- Compatible with Microsoft DirectStorage for gaming
Cons
- Requires a PCIe 5.0 compatible motherboard for maximum speed
- Heatsink size may interfere with small form factor (SFF) cases
- Active fan adds a potential mechanical failure point
- Higher power consumption compared to non-heatsink drives
Setup, Compatibility & Care
- Installation: Insert the drive into an available M.2 2280 slot that supports PCIe 5.0. Ensure the standoff is adjusted to the 80mm position.
- Compatibility: Verify your motherboard chipset supports PCIe 5.0. While backward compatible with PCIe 4.0 and 3.0 slots, you will not reach the rated 12,000MB/s speeds on older interfaces.
- Clearance: Before mounting, ensure there is enough physical space above your M.2 slot, as the heatsink is taller than standard M.2 covers.
- Care: Keep the heatsink fan intake clear of dust. Use compressed air periodically to clean the fins and fan blades to maintain cooling efficiency.
- Firmware: Check the Lexar support website periodically for firmware updates to ensure optimal compatibility with the latest operating systems.