Best current price£1.38from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£1.38Visit shop SKS Hirschmann 935980175 2mm MST 3 Miniature Plug 6A Green
Visit shop1 offer from £1.38
View price history by clicking the chart icon.
This guide is for engineers and technicians working with small-scale electronic connections requiring reliable signal integrity. The SKS Hirschmann 2mm MST 3 Miniature Plug offers a durable, green-colored solution for secure cable mounting with a 6A continuous operating current. A key consideration is its specific 2mm pin size, which requires compatible mating components.
| Model Part Number | 935980175 |
|---|---|
| Brand | SKS Hirschmann |
The connector features a 2mm diameter pin.
It is rated for a continuous operating current of 6A.
It utilizes a solder termination and is designed for cable mounting.
The sleeve is made of crushproof soft PVC.
The pin length is 10mm.
Yes, the connector is insulated.
The connector is green.
Check the solder joint for integrity. Ensure the mating connector is properly seated and is the correct 2mm type. Verify that the cable is securely connected to the plug.
Inspect the mating socket for damage or wear on the contact surfaces. Ensure the correct 2mm plug is being used, as 2mm plugs have specific tolerances.
Verify that the current being drawn does not exceed the 6A continuous operating limit. Check for high resistance in the connection or cable, which could indicate a poor solder joint or damaged conductor.
If the PVC sleeve is torn or cracked, it may compromise protection. Replace the connector if structural integrity is affected to prevent further damage to the connection.
Setup: To install, strip the appropriate length of cable wire and pass it through the sleeve. Solder the wire to the connector pin, ensuring a clean and solid joint. Secure the sleeve over the termination point. Ensure the mating socket connector is clean and compatible with the 2mm pin.
Compatibility: This plug is designed to mate with SKS Hirschmann 2mm MST 3 socket connectors or other compatible 2mm plug connectors. Verify that your existing or intended mating connector specifically supports a 2mm pin diameter and 10mm pin length. It is insulated and designed for cable mounting.
Care: To maintain optimal performance, keep the connector and its mating part clean and free from debris or corrosive substances. Periodically inspect the solder joint and the PVC sleeve for any signs of damage or wear. Avoid exposing the connector to excessive heat, moisture, or chemicals beyond its operational limits. Cleaning can be done with a dry or slightly damp, lint-free cloth. Do not use abrasive cleaners.
