Floor Pops Daphne Peel & Stick Floor Tiles - Cream - FP6539

Yes, but the floorboards must be level and smooth. If the boards have gaps, you should cover them with a hardboard underlayment first.

They are water-resistant and suitable for typical kitchen or bathroom moisture, but they are not waterproof and should not be used in standing water or shower areas.

No, these tiles come with a self-adhesive backing that is sufficient for standard installation on flat, clean surfaces.

While designed for floors, many users apply them to walls for backsplashes. However, ensure the wall is primed, as the adhesive is intended for horizontal floor surfaces.

You can easily cut the tiles using a sharp utility knife and a metal straight-edge ruler.

Yes, they are designed to be removable, but be aware that if they have been down for a long time, you may need to use a heat gun to soften the adhesive during removal.

Ensure the subfloor was completely free of dust and wax before installation. You can apply a small amount of additional vinyl-safe adhesive to the corner to secure it.

Check if the floor surface is porous or dusty. If the surface is damp or cold, the adhesive will not activate properly. Clean and prime the surface first.

Check your starting point. Always begin in the center of the room and work outward to ensure symmetry, or use a chalk line to maintain a straight grid.