Neutrik 3.5mm Right Angle Stereo Plug - Silver

The right-angled design is space-saving and helps to reduce cable strain by directing the cable parallel to the connected device or surface, making it ideal for tight spaces or preventing damage from protruding plugs.

While it has 3 poles (tip, ring, sleeve), it is designed for stereo (or balanced mono) audio. You can adapt it for mono by connecting the signal to either the tip or ring and the ground to the sleeve, but it's intended for stereo applications.

The chuck type strain relief can securely hold cables with an outer diameter ranging from 2mm to 4.5mm.

The NTP3RC is designed for audio connections and does not have a specific waterproof rating. It should be used in dry environments for optimal performance and longevity.

Typically, for a 3.5mm stereo plug, the tip (T) is the leftmost contact when looking at the solder cups, the ring (R) is the middle, and the sleeve (S) is the long contact closest to the cable entry. Refer to specific wiring diagrams for your audio application.

The connector contacts are made of brass with 2µm nickel plating.

Warranty information is typically provided by the retailer. Neutrik products are known for their quality and durability.

Check solder connections for all three poles (tip, ring, sleeve) to ensure they are secure and not bridged. Verify cable continuity with a multimeter.

Ensure the cable's outer diameter is within the 2mm-4.5mm range. Tighten the chuck type strain relief mechanism securely around the cable jacket.

Confirm you are using a standard 3.5mm jack. The NTP3RC is designed for standard receptacles; ensure the jack itself is not damaged or obstructed.

Re-check solder joints for clean connections. Ensure proper shielding is connected if applicable to your cable type. Verify that the device you are connecting to is functioning correctly.