X-Sense Carbon Monoxide Detector - XC0C-SR

The detector is designed to operate for 10 years from the date of first use. After 10 years, the entire unit must be replaced.

It uses two standard AA batteries, which typically last about 3 years. You will be alerted with a chirp and a flashing yellow LED when the batteries are low.

Yes, the XC0C-SR comes with screws and mounting hardware for easy wall installation. It can also be placed on a flat surface.

A green LED indicates normal operation. You can also press the TEST/SILENCE button weekly to ensure the alarm and indicator lights are functioning properly.

The digital display shows the current concentration of carbon monoxide in parts per million (PPM). It also shows the peak CO level detected since the last reset when the peak level button is pressed.

No, the X-Sense XC0C-SR is a standalone carbon monoxide detector and does not interconnect wirelessly with other alarms.

Gently wipe the exterior with a soft, damp cloth. Use a vacuum cleaner with a soft brush attachment to clean dust from the vents monthly.

Ensure batteries are correctly installed and fully charged. Press and hold the TEST/SILENCE button for a full 5 seconds. If the issue persists, contact customer support.

This indicates low battery power. Replace the AA batteries with new ones immediately. Ensure correct polarity.

This indicates a fault condition. Reset the unit by removing the batteries for 10 seconds, then reinstalling them. If the fault persists, the unit may need replacement.

Carbon monoxide has been detected. Evacuate the area immediately and call emergency services or your local gas company from a safe location. Ventilate the area once safe to re-enter.

Ensure the unit is not placed too close to air vents or sources of combustion. Try resetting the unit by removing and reinserting the batteries. Ensure the digital display is not obstructed.